BDSPL - FULLER S SC 840

  • MSDS: BDSPL
  • Manufacturer: H B FULLER CO
  • Product Name: FULLER S SC 840
  • National Stock Number: 8040-00-281-1977
Product Identification

Product ID:FULLER S SC 840
MSDS Date:01/01/1985
FSC:8040
NIIN:00-281-1977
MSDS Number: BDSPL

Responsible Party
H.B. FULLER CO.
2400 KASOTA AVE
ST PAUL, MN 55108-1511
US

Cage: DO317

Contractor
H.B. FULLER CO.
ST. PAUL, MN 55108 US

Telephone: 612-645-3401

Cage: DO317

Ingredients

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 30.0%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CYCLOHEXANONE (SARA III)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 5.0%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 17.0%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPYLENE OXIDE (SARA III)

CAS: 75-56-9

RTECS: TZ2975000

Fraction By Weight: 0.5%

OSHA PEL 100 PPM

ACGIH TLV: 20 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 17.0%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:EYES-SEVERE
IRRITATION.SKIN-MOD.DEFATTING.INHALATION-IRRITATION;POSSIBLE
UNCONSCIOUSNESS

First Aid

First Aid:EYES-FLUSH WITH WATER.SKIN-WASH WITH MINERAL SPIRITS-THEN
SOAP & WATER.APPLY SKIN-LOTION.INHALATION-REMOVE TO FRESH AIR.KEEP
QUIET.ADMINISTER ARTIFICIAL RESPIRATION IF NECESSARY.CALL A
PHYSICIAN

Fire Fighting

Flash Point:<0F,-18C OC
Lower Limits:1.1
Upper Limits:2.6
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.FIGHT
FROM A DISTANC
Unusual Fire/Explosion Hazard:SEALED CONTAINERS MAY RUPTURE WHEN
HEATED.VAPORS MAY CAUSE FLASH FIRE.

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES.VENTILATE. WEAR
RUBBER GLOVES & WIPE UP WITH ABSORBENT MATERIAL

Handling

Handling and Storage Precautions:HANDLE ONLY IN AREAS WHERE EQUIPMENT
MEETS STANDARDS FOR FLAMMABLES.EXTREMELY FLAMMABLE.VAPOR MAY CAUSE
FLASH FIRES
Other Precautions:CLOSE COVER AFTER USE.STORE IN COOL SPACE

Exposure Controls

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS IF IN
CONFINED AREA.
Ventilation:LOCAL-PREFERRED GENERAL IF SUFFICIENT TO DILUTE BELOW TLV
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:EYE WASH & SAFETY SHOWER
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:133F;56C
Vapor Pres:3
Vapor Density:>1
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:70.0

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES OR IGNITION
SOURCES
Hazardous Decomposition Products:MAY PRODUCE CO,CO*2,AND VARIOUS
HYDROCARBONS
Conditions to Avoid Polymerization:AVOID STRONG OXIDIZING AGENTS

Disposal

Waste Disposal Methods:INCINERATE OR LANDFILL ACCORDING TO LOCAL,STATE
& FEDERAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.